Deep-Cleaning Roller Wash System for Dark-to-Light Color Changes

396 UV

With high quality UV inks being used more by printers to attract attention to their work, a new generation of UV ink cleaners based on safer, more environmentally sound technology is being demanded. Tough UV inks need an exta tough wash. Tower 396 UV deep cleans UV inks without the toxic ethylene glycol ethers and flammables usually found in other ultraviolet ink cleaners. Tower 396 UV has a moderate evaporation rate and a mild odor for maximum performance on press. Meeting the high standards of demanding UV printers, 396 UV is the top of the line in UV wash technology! For EPDM Roller Compounds, use Tower UV Wash 100 Plus or California UV Wash.

View Technical Specification
View Material Safety Data Sheet

CALIFORNIA UV WASH

Califorinia UV Wash is specially formulated to work with EPDM compounds without the use of butyl cellosolve. California UV Wash does not contain any petroleum hydrocarbons and has a high flashpoint and mild odor. California UV Wash is approved for use by Baldwin, Bottcher and Rotodyne and will not harm CTP plates.

View Technical Specification
View Material Safety Data Sheet

Infinity Wash HMK UV

Infinity Wash HMK UV is a high flashpoint, FOGRA Approved UV/EB wash.

View Technical Specification
View Material Safety Data Sheet

METER CLEAN

Tower METER CLEAN is a fast drying metering roller cleaner for continuous dampening systems and other dampening rollers. The product thoroughly cleans the rollers in the dampening system to help prevent any ink or resin buildup that can feed back into the dampening system. When used with a typewash or degreaser for parts and equipment, Tower METER CLEAN cuts through the toughest soils and dries residue free.

View Technical Specification
View Material Safety Data Sheet

MRC 100

MRC 100 was developed to meet the requirements of Rule 1171 in Southern California. This is a very fast drying metering roller cleaner with great cleaning power. This product is available in five gallon and 55 gallon drums.

View Technical Specification
View Material Safety Data Sheet

MRC 2010

MRC 2010 is a low vapor pressure metering roller cleaner that features fast drying and strong cleaning action. The vapor pressure of the product is under 10mmHG which complies with many of the new state laws for vapor pressure in offset lithography.

View Technical Specification
View Material Safety Data Sheet

Tower 250 WA

Tower 250 WA is a rinsing agent designed to be added to the water reservoir of an automatic blanket wash system.

View Technical Specification
View Material Safety Data Sheet

Tower MRC

A fast drying metering roller cleaner with a low odor that can also be used as a typewash.

View Technical Specification
View Material Safety Data Sheet

Tower MRC-LV

Tower MRC-LV is a very fast drying low VOC metering roller cleaner. The VOC content of the product is under 30% which complies with the EPA Control Technology Guidelines for VOC content in offset lithography.

View Technical Specification
View Material Safety Data Sheet

UV Wash 100 Plus

UV Wash 100 Plus is a deep cleaning wash for both hybrid and UV inks. The product has a controlled evaporation rate and is water miscible.

View Technical Specification
View Material Safety Data Sheet

UV Wash 57

UV Wash 57 is a low VOC, roller and blanket wash for UV and hybrid ink cleaning. This is an excellent blanket wash for applications desiring a fast drying press wash.

View Technical Specification
View Material Safety Data Sheet

UV Wash HF

Our high flashpoint UV wash (142 F), UV Wash HF cleans UV ink without the toxic ethylene glycol ethers and flammable ingredients found in other UV Washes. UV Wash HF has a controlled evaporation rate and a mild odor for maximum performance on press. The product is also water miscible for further flexibility.

View Technical Specification
View Material Safety Data Sheet

SUPERWASH STEP ONE

SUPERWASH STEP ONE is a non-separating, viscous water/solvent/detergent blend that, when applied to rollers, actually extracts every bit of ink pigment from the pores of the rollers. SUPERWASH STEP ONE is for use on ink rollers and should be flushed with SUPERWASH STEP TWO or a high quality water miscible wash.

View Technical Specification
View Material Safety Data Sheet

SUPERWASH STEP TWO

SUPERWASH STEP TWO is the finishing and conditioning step of our two step system. It is used to flush or neutralize the residual SUPERWASH STEP ONE. SUPERWASH STEP TWO is formulated to completely rinse any remaining STEP ONE so that when the rollers are re-inked, emulsification will not occur. When THE SUPERWASH SYSTEM is used properly, don't be suprised to see ink colors from two or three jobs ago rinse out along with the ink that's on the press--this two step system cleans deep! That's how you can go from black to yellow in one wash.

View Technical Specification
View Material Safety Data Sheet

RESTORKLEEN

One of Tower's premier technology products, RESTORKLEEN is a breakthrough in roller and blanket maintenance. In fact, RESTORKLEEN will actually pay for itself in extended rubber life! RESTORKLEEN is a true, one-step deglazer, rejuvenator and conditioner. It not only strips glaze, but also restores plasticizers to rubber surfaces to condition and prevent dehydration. A once-a-day application of this easy-to-use liquid is all you need to keep roller and blankets velvety-smooth. RESTORKLEEN will also help improve your printing quality. Since you print from a blanket to the paper, a well-conditoned surface prints a sharper dot. And, clean rollers transfer ink and fountain solution more precisely! RESTORKLEEN is user friendly since it isn't flammable or toxic. It's a great value too, because you can replace your current deglazer and rejuvenator with one great product!

View Technical Specification
View Material Safety Data Sheet

NOTE:The information provided herein on our technical specification sheets and Material Safety Data Sheets (MSDS) is given in good faith, but no warranty, express or implied is made.